FREE On Line Ex Software
To use our on line software there is no need to install a program and the software will run on any web based device. Simply create an account (or log in with LinkedIn) to get access to the free tools. Certain professional level tools (‘Pro’ Ex Software) are only available to people who have attended specific training courses (Intrinsic Safety Designer, Ex h Designer etc.). Click image below to log in:
Free on-line Ex software tools
FlamCal: ATEX and IEC Flammable Properties Application. This ATEX tool allows the user to select a specific gas or vapour to determine the physical properties (temperature class, gas group, explosive range etc.) that will be required for ATEX or IEC equipment selection or area classification.
IntrinsiCal: ATEX and IEC Intrinsic Safety Circuit Evaluation Application. This ATEX Tool will give an indication of the maximum voltage, current and capacitance to use when designing a circuit to be intrinsically safe.
MESGCal: ATEX and IEC Flameproof Design Application. This ATEX tool is designed to provide a designer or an inspector with an indication of the correct maximum safe gap for a ‘Flamepath’.
SILCal: Safety Integrity Level Determination. This application is designed to assist you in the process of determining SIL in accordance with the guidance in IEC 61508. By select event scenarios, a target SIL will be given.
IntrinsiCal Pro: Advanced Intrinsic Safety Analysis.
Advanced Intrinsic Safety Analysis calculates a full analysis for a resistive circuit with mixed capacitance and inductance including safety component ratings.
Intrinsic Safety DSD Pro: Intrinsic Safety System Drawing Generator.
Select Barriers, Cable and Equipment from drop down menus and this software will conduct all the necessary calculations (including the new <1% rules) and generate a full report and DSD drawings.
ExMechCal Pro: Ex Non-Electrical Risk Assessment Tools.
A range of useful tools for non-electrical analysis including physical impact, rotating speeds and L10 bearing calculations.
SILCal Pro: Functional Safety and Failure Mode Assessment Tools.
Generates failure rate calculations (such as MTBF) based on flow chart input (AND/OR) from a database of failure rate data (editable/selectable).
Free Android ATEX Tools
FlamCal is available form the Android Store
iEx inspection is available after attending our course
ExVeritas are a UKAS Accredited ATEX Notified Body, IECEx Certification Body and CompEx Certification Centre. ExVeritas also offer full DSEAR/ATEX 137 safety services including our unique ‘iEx’ Software which offers a complete cloud based DSEAR/ATEX 137 EPD and Ex equipment Inspection Management System.